Decorating a home is a problem that many people face and there are many precautions to take. One of most important and basic is issue of construction safety, let's consider it together!

1. The main structure of house

The exterior surface of an interior wall of a building space cannot be removed at will, a load-bearing wall cannot be removed, and too many non-load-bearing walls cannot be removed. Because wall carries load in two parts.

2. Deleting a pipeline

Water, electricity and pipelines cannot be dismantled and changed at will, especially sewer pipelines. Once there is a problem, it is easy to leak, air leakage and electricity leakage. There will be not only certain security threats, but also serious economic losses.

3. Ground material weight

It is best not to lay marble tiles on floor of a building. Although quality of marble tiles is much better than that of floors and floor tiles, if floor is completely covered with marble, this will increase load on floor with a high probability, and there is a risk of collapse.

4. Conductor selection

Use copper wire for wire, but never use aluminum wire. Aluminum wires have poor electrical conductivity, tend to heat up during use, and connections are easily loosened, which in severe cases can lead to a fire. At same time, when building a hydroelectric power plant, it is better not to dig grooves and not to embed wires directly into wall, but to use usual installation of casing to avoid leakage and fire.

5. Essential environmental protection

Paint putty releases a lot of toxic gases such as formaldehyde. Once finishing is complete, open and ventilate space for more than three months before moving in. Green and environmentally friendly materials have little environmental pollution and little harm to human body.

6. Fire and Theft Protection

Keep doors and windows closed while you are renovating your home. Flammable and explosive materials should be well protected and placed in a hidden place, not in direct sunlight. After construction is completed, main plumbing and electrical valves must be closed.