After repair, house must be inspected and accepted. Although we will also carry out a phased acceptance in process of registration. But this does not mean that everything will be fine when house is handed over. Let's see what you should pay attention to when accepting a revision!
1. Checking electrical panel
Check whether operation of electrical box is flexible, open front cover of electrical box, check wiring of electrical box is neat and circuit markings are clear.
2. Checking outlet
Check that switch socket panel is level and flush with wall. Check that all switches are working and use professional equipment to determine if all wires in outlets and power supply are normal.
3. Checking water supply and sewerage
Check if faucet and water pipe are securely installed, and if valve's faucet switch is flexible. Is tap water smooth and there are no blockages. Turn on faucet and turn it off for a while to see if there is water on bathroom floor and if water flows smoothly. Check if floor drain is clogged and if the floor tiles are sloped for draining.
4. Acceptance of wall
Check wall for evenness, no trachoma, no color difference, check for correct angular deviation and vertical evenness of wall, and check for potholes in brick and plaster wall.
5. Land acceptance
Check if color of primer is uniform, if there are discolorations and scratches, and if there are any cracks, cracks and damage on surface. Check if ground plane is qualified, check if ground is hollow, and check if caulking is uniform and without color difference.
6. Check bathroom accessories
Installation of sanitary ware in bathroom must be solid and free from surface damage. The plumbing is hot on left and cold on right, water heater is flexible to start, toilet is not clogged or leaking, shower is made of safety glass, there is no leak at junction with plumbing. wall. It is these details that you should pay attention to when accepting.