The bathroom is a very important functional area, and space is not very large. Therefore, when making a layout, it is necessary to carry out reasonable planning, otherwise it will be very inconvenient to use it. So, let's take a look at details of bathroom design together.

1. Processing waterproofing layer of toilet

The toilet bowl is, first of all, a waterproof layer of soil, usually its thickness is 1.5 mm, it must be preserved even when painting, and special attention should be paid to dead corners during construction. The water resistance of wall is also related to ground, and waterproofing layer must be in indicated position.

2. Checking waterproofness of bathroom

After watertight construction is completed, a 24-hour confined water test must be performed. All drains in bathroom should be shut off and checked after 24 hours. If there are no leaks on walls and floor around bathroom, everything is in order.

3. Ventilation and lighting in bathroom

If bathroom is small and dark, it is more likely to become an incubator for bacteria and multiply them. So ventilation effect should be good. When choosing a floor finish, it is best to choose non-slip, water-resistant and dirt-repellent materials.

4. Bathroom lighting

When choosing lighting in bathroom, you can choose soft lighting. The use of such lighting will give people a calm and warm atmosphere. Color, size and function should be determined in conjunction with actual situation.

5. Bathroom details

In decoration of bathroom, there are many details to pay attention to, it is best to install water heater on a load-bearing wall, while making sure that between two ends of water heater and wall. Choose according to actual situation.