Renovation is a massive project and every detail must be taken into account. Finishing has always been a problem. Let's take a look at must-have decorating precautions today!
1. Ground Leveling
The ground of some houses is not flat enough and needs to be leveled during renovation. If workers are not careful enough or intentionally substandard, it will cause "the more you look, rougher" problem. building safety hazard. In absence of protection during normal operation, sand kickback will be very serious. Some only sprinkle a layer of cement on sand to cover owners.
2. Make sure switch panel is tidy
When finalizing circuit, it is necessary not only to pay attention to connection and wiring, but also to pay attention to installation of switch panel. Especially switch panel on side of door frame, if installed randomly and not aligned with door frame, it will affect aesthetics of house to a certain extent.
3. Grooving a wall
Underground pipelines must be cut into wall and into ground to bury pipelines. A small number of workers carried out barbaric construction work during slot operation, which not only damaged building's supporting structure, but could also damage other nearby pipelines.
4. Laying wall and floor tiles
Laying wall and floor tiles is a high-tech process. If workers cut corners, tiles are more likely to have issues such as hollow tiles and uneven seams. In addition, cement and adhesive used to lay tiles are also special. If ratio is not reasonable, problems such as falling away will occur.
5. Ground needs to be leveled for geothermal backfill
If you want to make ground geothermal, then you must level ground well when backfilling to avoid unevenness. Because after floor is laid on these bumps, the foot will make a "squeaky" sound when stepped on, which is very unpleasant to hear.