Now everyone basically entrusts finishing to decorative companies, on one hand, everyone is not a specialist, and on other hand, they are busy with work and do not have much energy for finishing. But you should be aware that there are still many details that we need to check in decorating process. Today I will share with you some decoration details!

Equipment

Decoration requires a lot of equipment, and equipment is easy to ignore. If we use poor quality equipment, it will bring a lot of inconvenience to our daily life, not to mention troublesome maintenance, and will cost more money.

Leaving seams for doors and cabinets

Generally, gap between door and floor is 5-8mm, distance between two sides of door and door frame should not exceed 6mm, and gap above door should not exceed 2mm. The gap between cabinet doors is 1-2 mm. Pay attention to checking seams of doors and cabinets, if this is not practical, you can add trims to windshield.

Socket

The number of outlets must be reserved enough, and not only enough, but also planned in detail. If socket is not well planned, it will affect our daily life, for example, if there is no socket at head of bed, it will be too troublesome to find a place to charge at night.

Tiles must be stacked together

The tiles must be laid together and filled with a decorative compound. If there is no seam, dirt will easily hide between tiles, and warping will occur after long use. Therefore, it is necessary to make seams for laying tiles.

It is not recommended to install a bathtub

Perhaps everyone will choose a bath when decorating, but in fact it will not be used all time. Since bath needs to be cleaned frequently, usage time is not directly proportional to cleaning time, so there is no need to install bath. Above are small details in decor that I want to share with you, you need to quickly collect them!