I've seen a lot of people build their own bathroom cabinets and cabinets, and this is first time I've seen them build their own bathtubs. Such bathrooms are very suitable for non-standard sizes, but I envy those who can comfortably take a bath at home, show whole process, who decorate and have not yet decorated, hurry up to learn, teach by hand!

Find out location of bath, choose shape yourself, whether it is rectangular or round, here is a round drop. To facilitate drainage below, a red brick foundation was first built, and ground raised a little.

I'm afraid size won't fit later. It's built with masonry, so use wooden poles to support finished tub first.

Yellow sand must be previously filled to bottom, and drainage system must be done well. The sand must be cleaned, without stones and bricks, to avoid scratches and water leaks at bottom of finished bath. This also allows tub to lower without compressing pipes.

The joint between base and bath should also be covered with glass. If you plan to use a solid tile, then you do not need this part. Just bury sand and fill it, level it, make it waterproof, and then stick tile. The color of tile can be chosen, blue It is most beautiful, but you also need to think about drainage outlet and make a good slope.

After tub is installed, there is another brick wall outside and middle part of countertop needs to be filled with cement and tiles. Shampoo and shower gel can also be stored on this countertop, which looks like a shelf.

The appearance of tile is very tall. This is finished look and there are a lot of things on surrounding countertops.

Install handrails and faucet, and final shaping effect, if they are all ceramic tiles, it will be fine if they are all tiled in middle. How did you learn?